磁翻板液位计采用不锈钢本体内衬聚炳烯PP工艺，有很高的结构强度和耐腐蚀性，可适用于盐酸等酸性、碱性液体和许多有机溶剂（尤其是活性族溶剂）。但不适合于浓缩硝酸、酩酸混合物、含氯溶剂、脂肪族、芳香氢等介质液体的测量。
Magnetic level gauge stainless steel body lining polypropylene PP process, has the very high structural strength and corrosion resistance, and can be applied to hydrochloric acid, alkaline liquid and many organic solvents (especially active solvent). Measurement but not suitable for concentrated nitric acid, MOET acid mixture, chlorinated solvents, aliphatic, aromatic, liquid medium.
　　磁翻板液位计适合腐蚀性介质的的液位测量。除现场指示还可配远传变送器、报警（控制开关），检测功能齐全。指示新颖，读数直观、醒目，观察指示器的方向可根据用户需要改变角度。测量范围大，不受储槽高度限制，指示机构与被测介质完全隔离，因而密封性好，可靠性高，使用安全。结构简单，安装方便，维护费用低。
Magnetic level gauge is suitable for measuring the corrosive medium. In addition to the instructions can be equipped with remote transmitter, alarm (switch), functional testing. Instructions novel, intuitive readings, eye-catching, observe the direction of the indicator can be based on user needs to change the angle. Large measuring range, without tank height limit, indicating mechanism and the measured medium separate totally, and good sealing, high reliability, safety. Has the advantages of simple structure, convenient installation, low maintenance cost.
　　精密不锈钢水中的一般腐蚀速度非常低，不需留有腐蚀余量。磁翻板液位计能够经受非常高的流速(>40m／s)。耐腐蚀性同高强度结合可缩小断面直径，减小壁厚和降低重量，从而快速、容易地安装。可延展性使得使用合适的工具不困难地弯曲和切削。特别是不锈钢压入配合易用于接头处，是在空间和通道有限的地方安装或有发热问题的地方使用的理想材料。
General corrosion speed precision stainless steel water is very low, need not have corrosion allowance. Magnetic level gauge can withstand very high velocity (>40m / s). Corrosion resistance and high strength combined with reduced section diameter, reduced wall thickness and weight reduction, so fast, easy to install. Ductility allows bending using a suitable tool is not difficult and cutting. Especially for stainless steel press fit to be used in the joint, is the ideal material for use in the limited space and access local installation or heating issues of local.
　　由于磁翻板液位计具有稳定性好，测量精确度高和安装调试方便的特点，被广泛应用于多个行业。
Because the magnetic level gauge has the advantages of good stability, high accuracy and convenient installation and debugging, is widely used in many industries.